English
français
Deutsch
italiano
русский
español
português
العربية
Nederlands
한국의
Romania
Bulgaria
Melayu
What Are You Looking For?
As a basic chemical industry producing chlorine (Cl2) and caustic soda (NaOH), the value of hydrogen produced as a byproduct of the chlor-alkali industry is increasingly recognized. Compared to dedicated water electrolysis for hydrogen production, chlor-alkali byproduct hydrogen is lower in cost, but it contains small amounts of impurities such as chlorine, oxygen, and nitrogen, significantly limiting its application. The following is a detailed comparison of the technological differences between ion-exchange membrane chlor-alkali hydrogen production and alkaline water electrolysis (AWE) hydrogen production, focusing on three core dimensions: electrolysis principle, electrode materials, and membrane materials.
With the increasing importance and rapid development of green hydrogen energy, the most widely used alkaline water electrolysis (AWE) hydrogen production technology, while both chlor-alkali hydrogen production and chlor-alkali hydrogen production belong to alkaline electrolysis systems, differ significantly in their core hydrogen production mechanisms. A detailed comparison follows:
| Comparison Dimension | Chlor-Alkali Hydrogen Production | Alkaline Water Electrolysis for Hydrogen Production |
| System Nature | Alkaline | Alkaline |
| Core Reactions | Anode: Chlorine Evolution Reaction (CER) Cathode: Hydrogen Evolution Reaction (HER) |
Anode: Oxygen Evolution Reaction (OER) Cathode: Hydrogen Evolution Reaction (HER) |
| Core Components | Electrolyzer, Cation Exchange Membrane, Electrodes | Electrolyzer, Diaphragm, Electrolyte, Electrodes |
| Anolyte Medium | Saturated Sodium Chloride (NaCl) Solution | Alkaline Electrolyte (20%~30% KOH solution) |
| Catholyte Medium | Dilute NaOH Solution (approx. 30% by mass) | Alkaline Electrolyte (20%~30% KOH solution |
| Charge Carrier | Na⁺ (migrates through the cation exchange membrane) | OH⁻ (migrates through the diaphragm) |
| Cathode Reaction | H⁺ is reduced to H₂; Na⁺ combines with OH⁻ to form NaOH, which gradually concentrates | H⁺ is reduced to H₂; Na⁺ combines with OH⁻ to form NaOH, which gradually concentrates |
| Anode Reaction | Cl⁻ is oxidized to Cl₂ | OH⁻ is oxidized to O₂ and electrons |
| Electrolyzer Structure | Bipolar zero-gap (membrane) design | Bipolar zero-gap (membrane) design |
The electrode is the core site of the electrolysis reaction, and the selection and modification of the catalytic materials (especially noble metal catalytic materials) on its surface directly determine the electrode performance, electrolyzer life, and energy consumption level. A detailed comparison of the differences in electrode materials between the two technologies is as follows:
| Comparison Dimension |
Chlor-Alkali Electrolysis(Anode/Cathode) |
Alkaline Water Electrolysis(AWE, Anode/Cathode) |
Core Reasons for Differences |
| Operating Environment | Anode: Strongly acidic (Cl⁻ system), 80~90°C; Cathode: Strongly alkaline |
Entire system strongly alkaline, 60-90°C | Chlor-alkali anode requires chlorine corrosion resistance; AWE requires alkali corrosion resistance throughout |
| Anode Substrate Material | Titanium (Ti) substrate | Nickel (Ni) substrate | Ti resists chlorine corrosion and has good conductivity; Ni resists alkali corrosion and has lower cost |
| Anode Catalytic Coating | RuO₂ + IrO₂ mixed oxide (DSA) | RuO₂ + IrO₂ mixed oxide (DSA) | Chlor-alkali focuses on Chlorine Evolution Reaction (CER) activity; AWE focuses on Oxygen Evolution Reaction (OER) activity and alkaline stability |
| Cathode Substrate Material | Ni mesh / Ni wire woven mesh | Ni-based materials (Ni mesh, Ni foam, Ni felt, etc.) | Ni has far better stability in strong alkali than carbon steel, suitable for ion-exchange membrane electrolyzers and high-alkali conditions |
| Cathode Catalytic Coating | Ni-S, Ni-Co, Raney Ni (no precious metals) | Non-precious metal alloys (Ni-S, Ni-Co, Ni-Mo, etc.) | Both aim to reduce Hydrogen Evolution Reaction (HER) overpotential; AWE places more emphasis on low cost and low precious metal loading |
| Operating Current Density | Anode: 5000~6000 A/m² | Anode: 2000-4000 A/m² | Chlor-alkali DSA technology is mature; AWE has seen recent breakthroughs in electrodes/diaphragms, significantly increasing current density |
| comparison Dimension | Chlor-Alkali Electrolysis (Anode/Cathode) | Alkaline Water Electrolysis(AWE Anode/Cathode) | Core Reasons forDifferences |
| Core Performance Goals | Low chlorine evolution overpotential, chlorine corrosion resistance, long life, high chlorine efficiency | Low oxygen/hydrogen evolution overpotential, alkali corrosion resistance, low cost, high current density adaptability | Chlor-alkali core is efficient chlorine/caustic production; AWE core is efficient hydrogen production and energy consumption reduction |
| Cost Control Logic | Relies on mature precious metal (Ru/Ir) coating technology, reducing costs through scale | Focuses on low precious metal loading, non-precious metal substitution, and bifunctional electrodes to simplify structure | AWE is more cost-sensitive, needing to balance performance with large-scale application costs |
3. Comparison of Membrane Materials for Chlor-alkali Hydrogen Production and Alkaline Water Electrolysis Hydrogen Production:
Membrane materials are key components in electrolyzers, separating the anode and cathode, and enabling charge transfer and product separation. Due to differences in core reactions and media, the membrane materials used in these two technologies differ significantly in type, function, and performance: the chlor-alkali industry primarily uses cation exchange membranes, while alkaline water electrolysis hydrogen production mainly uses diaphragm membranes. A detailed comparison is as follows:
| Comparison Dimension | Chlor-Alkali Industry Cation Exchange Membrane | Alkaline Water Electrolysis Diaphragm (for AWE) |
| Core Application Scenario | Chlor-alkali electrolyzer (NaCl electrolysis for Cl₂, NaOH, H₂ production) | Alkaline water electrolyzer (KOH electrolyte for hydrogen production) |
| Membrane Type / Structure | Perfluorosulfonic acid (PFSA) + Perfluorocarboxylic acid (PFCA) double-layer composite cation exchange membrane | Early: Asbestos diaphragm → PPS woven fabric → Composite diaphragm (PPS + ZrO₂ / polysulfone coating) |
| Core Functional Group | Sulfonic acid group (-SO₃⁻), Carboxylic acid group (-COO⁻) | No ion exchange groups (porous physical barrier); composite membrane coating enhances hydrophilicity |
| Working Principle | Allows directional migration of Na⁺ and other cations, blocks back-diffusion of Cl⁻ | Physically separates anode and cathode, allows OH⁻/water to pass |
| and OH⁻, prevents reaction between Cl₂ and NaOH | through, blocks H₂/O₂ cross-permeation | |
| Representative Material / System | Perfluorosulfonic/carboxylic acid composite membrane (with PTFE reinforcing mesh) | PPS diaphragm fabric, PPS+ZrO₂ composite diaphragm, polysulfone microporous membrane |
| Core Advantages | Current efficiency ≥96%, low energy consumption, product purity ≥99.5%, less contamination, service life 3-5 years | Low cost, good alkali resistance, high mechanical strength, composite membrane service life ≥5 years, high temperature resistance up to 110°C |
| Main Disadvantages / Challenges | High technical barrier, expensive, poor resistance to impurities (e.g., Ca²⁺, Mg²⁺) | Traditional diaphragm: high impedance, high hydrogen permeability; composite membrane: coating easily peels off, poor durability |
| Industrial Maturity | Mature industrialization, global mainstream technology | Mature industrialization, traditional PPS is mature |
Both chlor-alkali electrolysis and alkaline water electrolysis for hydrogen production are mature electrolysis technologies. Their differences in system properties, core components, and performance targets stem from their different design intentions: chlor-alkali electrolysis focuses on producing chlorine and caustic soda, with hydrogen as a byproduct; alkaline water electrolysis aims to produce high-purity hydrogen efficiently and at low cost. Against the backdrop of the rapid development of the hydrogen energy industry, these two technologies can learn from each other's experience in electrode materials, membrane materials, and electrolyzer structures. Through technological integration and innovation, it is hoped that the performance of both electrolyzers can be further optimized, production costs and energy consumption reduced, and the high-quality development of electrolytic hydrogen production technology and the hydrogen energy industry can be promoted.
FAQ：
1. Who are we?
We are based in Anhui, China, start from 2011,sell to Southeast Asia,North America,Eastern Europe,South Asia.
2.Can you customize the rated power or voltage?
Yes, customizing products is acceptable.
3.Why should you buy from us not from other suppliers?
We have an experienced professional technical research and development team. Control system matching ability/R&D and quality control ability. Price advantage brought by supply chain integration capabilities.
IPv6 network supported
